How To Make A Fake Beard With Makeup

Download Article

Download Article

Whether it is for apparel-upwards, a cosplay, or a play, knowing how to make a fake beard can come in handy. Depending on the materials you lot utilise, y'all tin can create a uncomplicated, imitation beard perfect for dressing up, to a more realistic beard improve suited for cosplay and theatre. Once yous know how to make a bones beard, you lot can apply similar techniques to create other pieces, such as a mustache!

1. ane

   Cutting a 3 by 4-inch (7.6 to x-cm) slice out of felt for the base of your beard. The exact shape does not thing, but an oval or trapezoid will work the best. You will exist attaching the wool roving to this, so choose a colour that matches your wool.

   • For example, if your wool roving is foam-colored, employ white or off-white felt.
   • You can utilize this method for shorter beards, just it works the best on longer, gnome-like beards.

2. 2

   Cutting an almond-shaped pigsty in the felt for your mouth. Place the felt piece confronting your face up, and feel where your mouth is. If you need to, describe on the felt with a pen. Pull the felt abroad, then cut an almond-shaped hole out of it. Information technology should be big enough for your lips to fit through.

   • Trim the top corners of the shape off so that they follow the bend of your mouth and cheeks better.

   Advertisement

3. 3

   Pull your wool roving into your desired length. Become some wool roving and unravel it to make a rope. Pull it apart widthwise into thinner ropes, then pull information technology into 6 to ten-inch (xv to 25-cm) lengths. Make sure that ropes are all equal length.

   • Do not cutting the wool roving, or you volition get precipitous ends that won't expect natural.
   • Yous can observe wool roving in arts and crafts stores, cloth stores, and yarn shops. You can also find it online.
   • Wool roving is only wool that has not been twisted into yarn however.

4. 4

   Identify a thin weft of roving against the bottom of the mouth opening. Gather a 1-inch (2.5-cm) wide piece of wool roving, and place the terminal ¹⁄_two inch (1.3 cm) under the almond mouth opening. Make sure that the longer part of the wool is pointing up so that it covers the mouth and the last ¹⁄₂ inch (i.three cm) is pointing downwards.

   • Repeat this footstep 1 to 2 more times until the entire bottom edge of the oral cavity is covered.
   • You will be flipping the longer function of the wool downwards later on you sew it. This volition hide the seam.

5. 5

   Stitch or mucilage the wool roving downwards. Thread your sewing machine with a thread color that matches the wool. Set it to a straight stitch and a brusque sew length. Begin sewing at the bottom-left corner of the mouth and finish sewing at the bottom-correct corner.

   • Backstitch when yous start and finish sewing to prevent the thread from unraveling.
   • Run up as close equally possible to the bottom edge of the oral cavity. Do not sew across the top edge.
   • Y'all can use hot glue, tacky gum, or textile glue for this step if you don't know how to sew.

6. 6

   Flip the wool roving so that it hangs down and covers the oral cavity opening. In one case yous have finished sewing, cut off any loose or hanging threads. Take the longer part of the wool roving that is covering the mouth, and pull it down so that you can see the mouth it again. This should hide the i/2-inch (1.3-cm) office of the wool roving that you sewed downwardly.

   • If you used gum, wait for the gum to dry out commencement. Hot mucilage sets rapidly, but fabric gum will have 15 to 20 minutes. Tacky glue may take several hours.

7. seven

   Tie a slice of string around a length of roving for the mustache. Pull off a length of wool roving for the mustache--it can be as long as you lot want information technology to be. Cut a piece of thread the aforementioned color as the roving, and then wrap information technology a few times around the middle of the wool roving. Tie the thread into a tight knot.

   • This volition crusade the mustache to sure-fire in the middle and poof out; information technology will expect more realistic.

8. viii

   Mucilage the mustache to the top of the felt piece. Outline the tiptop edge of the mouth with hot gum, fabric mucilage, or tacky glue, then printing the roving into the glue. Brand sure that the part you tied is centered. At this signal, you tin can also glue down the balance of the bristles.

9. nine

   Secure a sparse rubberband to each side of the felt piece. Concur the beard confronting your face, then measure around the dorsum of your head, from one side of the felt to the other. Cut a thin piece of rubberband according to this measurement. Necktie a knot in each end, then staple the knots to each side of the felt.

   • Alternatively, thread the elastic through a yarn or tapestry needle, so poke it through the felt. Slip the needle off, and so tie a knot in the rubberband.

Advertising

1. 1

   Trace a bristles shape on the back of a piece of false fur. Take a piece of fake fur and flip it over then that the back (textile) side is facing you. Draw a bristles shape on the fabric with a marking, including the mouth hole.^[1]

   • You can also use felt instead.^[2]
   • Your beard can exist any color your want, simply white, brown, black, greyness, or orangish will look more natural.

2. 2

   Cut the beard with a craft blade or scissors. Make certain that you cutting from the back of the fabric. Slide your scissors through the fur so that you don't cut the fibers. You lot simply want to cut the cloth part of the fur, not the fur part. Be sure to cutting the mouth hole out too.^[3]

   • The mouth hole needs to be big enough to expose your lips.
   • If you are making a felt beard, use scissors instead.^[iv]

3. 3

   Add an 8-inch (20-cm) elastic to each side of the beard. Cutting an 8-inch (20-cm) long piece of elastic. Fold it in half to make a loop, then sew information technology to the top-left corner of the bristles. Brand sure that the beard and elastic overlap each other by near ¹⁄₂ inch (one.3 cm). Repeat this step for the right side of the beard.^[v]

   • Brand sure that y'all are sewing the rubberband to the back of the beard. If you are working with faux fur, this is the textile side, not the furry side.
   • The rubberband needs to be long enough to claw around your ears. You may demand to make it longer or shorter depending on the size of your head.
   • Alternatively, yous can cutting a single piece of elastic and sew each end to each side of the bristles. This way, you tin can pull the elastic over the dorsum of your head instead of your ears.

4. 4

   Cutting an identical beard out of matching felt. Find a piece of felt that's the same color as your beard. Fix your felt or faux fur beard on top of the felt. Trace around the beard with a marker, then set it bated. Cut the felt only inside the lines that you traced.^[half-dozen]

   • If you want to make a simple faux fur beard, you lot are washed.^[7]
   • You should do this step if you lot are making a simple felt beard. A double-layer of felt will be much stronger than a unmarried layer.

5. five

   Pin and sew the second piece of felt to the dorsum of the beard. Flip the beard over so that yous can see the back. Place the felt beard on top, covering the elastic. Pin information technology in place, then sew around the edges using a whipstitch.^[8]

   • Alternatively, y'all can glue the 2 pieces together using fabric gum.
   • If yous used felt for both pieces, consider sewing around information technology on a sewing automobile using a straight sew together and a 1/8 to i/4-inch (0.32 to 0.64-cm) seam assart.^[9]

Advert

1. 1

   Gear up the beard simply earlier you need to wear information technology. This beard is not reusable. It is very realistic, however, making it ideal for costumes, cosplay, and theatrical productions. Give yourself at to the lowest degree half an hr to prepare the beard.

   • Y'all can set the beard even earlier, but it wouldn't be a good idea to set up it the twenty-four hours before. It won't be comfy to sleep in and it will brand a mess.

2. 2

   Unravel 12 inches (30 cm) of crepe wool. You can buy crepe wool in the doll-making department of some arts and crafts stores and fabric shops, but you may have better luck in a costume store or online. It is a long piece of wool roving (wool that hasn't been spun into yarn) that's woven into a braid-similar rope with string.

   • To unravel crepe wool, simply pull on the string and gently unwind the wool.
   • for best results, choose a color that closely matches your ain. If you can't find the correct colour, go a shade darker.

3. iii

   Untwist the crepe wool and cutting it to your desired length. Gently tug the wool apart to create a broad, thin sheet. Gently pull on the fibers to separate a tuft that's shut to the length yous need. Hold the fibers against your chin, and trim them if needed.

4. 4

   Employ spirit gum nether your chin and wait one infinitesimal. Open up a bottle of spirit gum. Employ the attached castor to use a thin layer of spirit gum to just under your mentum, correct where the bone is. Wait one minute for the spirit mucilage to get tacky.

   • Only employ a minor patch of spirit gum, well-nigh ⁱ⁄_ii inch (1.iii cm) broad and 1 to two inches (two.five to 5.1 cm) long.
   • Y'all can find spirit gum in costume stores and online.

5. five

   Printing the crepe wool into identify. Find the cutting ends of the fibers. Spread them out so that they tin can cover the area yous coated with spirit gum. Gently press them against the spirit mucilage. Button the tuft into place with a wood cuticle pusher or the end of a makeup brush.

6. 6

   Echo the process to apply more crepe wool. Apply some spirit gum to your jaw, then let information technology dry out for one minute. Measure and cutting the crepe wool, then printing information technology into place. Piece of work your style along your jaw first, then work your way up past your chin and jaw bone.

   • How far up your face you apply the beard is upward to you. Yous can even utilise a little on your upper lip to create a mustache.
   • Look at pictures of real beards to become an idea for style and shape.

7. 7

   Trim the beard to your desired length. Chances are, the bristles may exist uneven in some areas. Use pair of scissors to trim the beard into your desired shape. Once more, wait at pictures online for ideas on how to cutting your beard.

   • Practice not use a beard trimmer or clipper, or the spirit gum will clog it upward. Utilize small trimming pair of scissors.

8. viii

   Apply translucent setting powder over backlog spirit glue. This will assist dry it out and forestall shine. For best results, use theatrical-grade translucent setting powder and a large, fluffy, makeup castor. Information technology comes in loose-powder form rather than pressed-powder form. You tin detect information technology in costume stores and online.

   • At this point, you tin can finish the rest of your makeup, including foundation, contouring, eyeshadow, etc.

9. 9

   Remove the beard with spirit gum remover when you desire to take information technology off. Dip a sponge-tipped makeup brush into spirit gum remover, then dab the superlative border of your beard. Wait most xxx seconds for the spirit mucilage to deliquesce, then pull the bristles abroad. Echo the process for the next layer of beard until you have everything removed.^[10]

   • Wipe your chin and jaw (wherever you applied the spirit mucilage) afterward with a cotton fiber brawl dipped in spirit gum remover to go rid of any residual.
   • You lot can buy spirit glue remover online and in costume stores. It is usually sold alongside the spirit gum.

Advertizement

Ask a Question

200 characters left

Include your electronic mail address to become a message when this question is answered.

Submit

Ad

• Match the bristles color to your ain. If you lot can't find the correct color, go a shade darker.

• You tin find small swatches of fake fur in the craft store, but a cloth store will have a bigger choice.

Thank you for submitting a tip for review!

Advertisement

Things Yous'll Demand

• Felt
• Wool roving
• Scissors
• Sewing machine
• Hot glue, fabric glue, or tacky glue
• Sparse rubberband

• Imitation fur and/or felt
• Thin elastic
• Sewing pins
• Scissors
• Needle
• Thread

• Crepe wool
• Spirit glue
• Spirit gum remover
• Cream-tipped makeup castor
• Scissors
• Powder castor
• Translucent setting powder

About This Article

Article Summary Ten

To make a fake beard, kickoff by getting some crepe wool and spirit glue from your local costume store or online. Then, unravel about 12 inches of the crepe wool past pulling on the cord and unwinding the wool. Adjacent, tug the wool autonomously to create a wide, thin sheet, and pull the fibers to become the length you want. Subsequently that, use a thin layer of spirit gum simply under your mentum and wait a minute for information technology to get tacky earlier you press the wool into identify. Repeat the process to add additional layers of wool forth your jaw and up past your chin. To acquire how to use wool roving or faux fur to make your fake beard, keep reading!

Did this summary help you?

Thanks to all authors for creating a folio that has been read 61,980 times.

Did this article help y'all?

Source: https://www.wikihow.com/Make-a-Fake-Beard

Posted by: brownthowenty.blogspot.com

Share this post